• 月薪42100~45800元 新竹市東區 工作經歷不拘 22天前更新
    ※歡迎對半導體業有興趣的優秀人才加入我們的行列※ 【工作內容】: 1. 客戶端現場(無塵室內)設備裝機、保養、修繕等 2. 公司其他據點支援出差 (交通補助&提供宿舍) 3. 需配合加班或輪班 (輪班、on call另有津貼) 4. 與客戶維持良好關係 5. 遵守客戶端工安規定 【職缺人數】: ➤新竹x3 【工作時間】: ➤日班 9:00~18:00 ➤可能輪班小夜/大夜 (一個月1~2次,一次約1週左右) ➤視需求出差& on call 【薪資】:月薪42,100元-月薪45,800元 ★★另外-有夜勤津貼 & on call津貼 ❖享五一勞動、端午、中秋、生日禮金/禮盒 ▬▬▬▬【應徵方式】▬▬▬▬ 1.加好友ID: 0986050810林小姐 (截圖詢問,告知姓名電話) 2.直接線上投履歷,將儘速與您聯絡!!
    展開
    禮品意外險員工及眷屬住院慰問金員工聚餐尾牙
  • 月薪35000~38000元 新竹市東區 工作經歷不拘 6天前更新
    固定日班,不需輪班,穩定的工作,歡迎您的加入~ 工作內容: 1.駐廠(如 TSMC、UMC等半導體廠)工作 2.例行性的合約校正保養清潔工作(靜電消除器) 3.協助工程師在安裝產品(前置作業準備備料、物料傳遞、扶A字梯等其他安裝協助) 4.校正測試報告作業Key in 5.其他主管交辦事項 無經驗可,有完整培訓 固定日班:08:30~17:30週休二日,見紅休 (歡迎大學夜校生) 薪資35,000起,加班費另計 享有勞健團保、特休假、期滿獎金、年終獎金1-2個月
    展開
    意外險週休二日勞保健保
  • 月薪55000~65000元 台中市后里區 工作經歷不拘 62天前更新
    【工作內容】 • 制定設備維護標準 • 建立/優化維修制度 • 管理並降低機台零件成本 • 處理設備異常與維修 • 提升設備產能與效能 • 新設備評估與導入 【上班地點】台中市后里區 【上班時間】日班07:30-19:30 / 夜班19:30-07:30 1. 須穿著無塵衣,進入無塵室工作 2. 做四休三、做三休四,3-4個月日夜輪班一次 【薪資待遇】依經歷核薪
    展開
  • 日薪1680~1680元 桃園市桃園區 工作經歷不拘 10天前更新
    工作內容: 電腦設備維護、安裝、軟體安裝、資料備份、設定、測試 需自備機車於桃園地區跑點,每日補貼50元油資 以任務分派為主,非固定地點
    展開
  • 月薪31900~56000元 高雄市楠梓區 工作經歷不拘 7天前更新
    👉4-6月報到8H早班或12H早班,加發15000元;8H晚班或12H晚班,加發20000元,發放日需在職 🎯假日加班倍率1.67倍,優於勞基法 🎯餐費補助:80元/天(早/晚班,都須訂公司餐點) 🎯績效獎金最高6000元 🎯冷氣房,不需穿無塵服 🎯固定班,不輪班 🎯周休二日/見紅休 🌸意者,請截圖,找楊小姐詢問🌸 👉👉 Line ID: @bia2554i 👉👉或撥:0980-021-111 工作內容: 產品測試、組裝、包裝相關工作 【工作時間】 ■ 上班時間(自選): 💜12小時制: 【上班時間】 休息2小時20分 固定早班 08:00-20:00 固定夜班 20:00-08:00 【薪資待遇】 早班:約31900元起 (另有0~6000績效獎金) (若配合加班40H/月,薪資約45000元) 夜班:約40000元起 (另有0~6000績效獎金) (若配合加班40H/月,薪資約54000元) 【做二天休二天/固定班】
    展開
    員工團保意外險產假員工體檢勞退提繳金
  • 面議(經常性薪資達4萬元或以上) 新竹市東區 工作經歷不拘 189天前更新
    該公司為全球第一大IC設計公司,第一個產品和服務包括OmniTRACS衛星定位和傳訊服務,廣泛應用於長途貨運公司,和專門研究積體電路的無線電數字通訊技術。 JD • The candidate needs to engage a team across geos and possesses solid knowledge of 802.11AX/BE MAC protocols, embedded systems, and testing infrastructure. • The job requires following the timeline strictly and having the capability of a fast turn-around for solutions to highly complex, challenging issues. • The responsibilities cover overall chip lifecycle development, including FPGA emulation for MAC mainly, involve with worldwide design team to complete the pre-silicon verification, ASIC bring-up for MAC/FW/Host, as well as system performance tuning and customer support. Qualification • Master’s degree in Engineering, Electronic Engineering, Computer Science, or a related field. • 2+ years of proven Firmware Engineering, IEEE802.11 MAC/PHY design, or related work experience. • Comprehensive understanding of IEEE802.11 MAC protocol design, including data transfer sequence, MSDU/MPDU/PPDU, CSMA/CA. Experience with 11AX/BE is a plus. • Linux/firmware/embedded-system design, kernel driver development. • Pre-silicon bring-up and verification. PHY layer experience is a plus. • Understanding of the ASIC verification process, and WIFI testing/issue analysis. IEEE Lab certification experience is a plus. • Source code management systems such as Perforce, and GIT. • Electrical Engineering or Computer Science/Networking • Solid understanding of WIFI networks and IEEE802.11 stds. • Solid knowledge of using bench equipment (e.g. oscilloscope, Litepoint tester, sniffer,…). • C/C++ programming skills. Python/Perl/Shell script is a plus. • Fluent English capability. 此職缺為派遣職,一年一簽
    展開
  • 面議(經常性薪資達4萬元或以上) 新竹市東區 工作經歷不拘 189天前更新
    Skills/Experience: • With working experience in the class 1000 or higher level clean room. • With experience of equipment operation on the process equipment such as coater, printers, dispensers, cleaners, or ovens. • Or experience working on instrument operation as an optical microscope, surface profiler, or other electrical testing instrument. • Familiar with the tool operation principles, troubleshooting, and maintenance in the slit coater or photolithography, ACF bonder, COF bonder, and Resin laminator. • Good communication skills in both written and oral. Responsibilities: • Line operation Mon-Fri. AM9:00 to PM 6:00. • Daily tools startup, calibration, and setup for processes. • Tool troubleshooting and PM. • Process setup for the experiments and execution. • Data collection and/or basic analysis. • Mask/Screen design capability with CAD is a plus. 此職缺為派遣職,一年一簽
    展開
  • 月薪35000~50000元 新竹市東區 工作經歷不拘 157天前更新
    該公司為全球第一大IC設計公司,第一個產品和服務包括OmniTRACS衛星定位和傳訊服務,廣泛應用於長途貨運公司,和專門研究積體電路的無線電數字通訊技術。  職位描述: 熟悉高科技行業中連接性部門的調試、測試、組裝、配件製備、進度管理、進出管理等工作。  學歷: 高中畢業或以上,良好的英語能力為佳。  人格特質: 靈活且樂於助人,有耐心,願意學習。 【為三個月專案性質職缺】
    展開
  • 面議(經常性薪資達4萬元或以上) 新竹市東區 工作經歷不拘 189天前更新
    該公司為全球第一大IC設計公司,第一個產品和服務包括OmniTRACS衛星定位和傳訊服務,廣泛應用於長途貨運公司,和專門研究積體電路的無線電數字通訊技術。 Role and Responsibilities: With the approaching and widespread of WIFI technology, we are actively seeking talented engineers who will be responsible for system design, validation, and optimization in the hardware/system team. As a member of the WIFI Hardware System team, you will participate in Wi-Fi system design, development, validation, integration, and performance optimization. The responsibilities cover overall chip lifecycle development, including FPGA emulation, pre-silicon verification, ASIC bring as well as system performance tuning and customer support. You will need to collaborate with SOC, analog, and algorithm teams to develop new Wi-Fi features. Requirements Minimum Qualifications: Master‘s degree in Engineering, Electronic Engineering, Computer Science, or related field. Systems Engineering or related work experience with extensive lab experience and debugging capabilities. Good team communication, documentation, and interpersonal skills. Preferred Qualifications: Experience in at least one or more of the following areas: o Communication theory, signal processing, RF Systems, Microwave engineering, signal estimation and detection, automatic gain control, RF impairment estimation and correction, channel estimation, Power control, RF interfaces and digital mitigation of RF distortion, etc. o Experience with wireless standards (WiFi/BT/5G/LTE/UMTS) o Knowledge and/or experience in MIMO, OFDM, CDMA o PHY/MAC layer systems design, spectrum sharing, and next-generation WiFi. o Experience in performance analysis and system-level simulation. o Ability to program effectively in C/C++, Python, and/or Matlab. - Experience in verification on FPGA, and system simulation is a plus. - Hands-on lab debugging/measuring skills and characterization using Spectrum Analyzer, VSG, VSA, Network Analyzer & Power Meter. -Strong analytical problem-solving approach, good communication skills, self-motivated, cheerful, and optimistic attitude. 此職缺為派遣職,一年一簽
    展開
  • 面議(經常性薪資達4萬元或以上) 新竹市東區 工作經歷不拘 189天前更新
    該公司為全球第一大IC設計公司,第一個產品和服務包括OmniTRACS衛星定位和傳訊服務,廣泛應用於長途貨運公司,和專門研究積體電路的無線電數字通訊技術。 Responsibilities: The role involves hands-on DVT evaluation of reference designs in a controlled environment, working closely with other DVT engineers and lab technicians, driving data gathering and consolidation, and presenting results to engineering teams. As part of the DVT team, the candidate will: - Utilize internal automation tools to verify system-level performance of WLAN reference designs - Conduct DVT entry reviews in preparation for DVT - Generate DVT exit review material and conduct data reviews for the engineering team - Generate DVT reports for internal and external customer release - Be responsible for the integrity of DVT data. Address discrepancies promptly and verify the solution - Contribute to internal DVT standards and procedures - Identify and enable new test capabilities using solid scripting/programming skills - Work with lab technicians to design and implement new test setups as needed - Provide timely feedback to the engineering teams about the progress and status of DVT Minimum Qualification: - Bachelors in EE. Fresh graduate or engineer with 0-3 years of industry experience - Good understanding of electronics engineering fundamentals, RF circuits, and RF performance metrics (Sensitivity, Intermodulation, Tx Power, ACLR, EVM, S-parameters) - Hands-on knowledge of RF instrument operation: Signal Generators, Spectrum Analyzers, Power meters, Network Analyzers etc. - Knowledge of statistical data processing using data analysis tools (Extensions, JMP, data power, etc.) - Basic programming (QDART tree) and debugging skills 此職缺為派遣職
    展開
  • 月薪35000元 新竹縣竹東鎮 工作經歷不拘 7天前更新
    工作內容: 半導體無塵室機台操作及協助製程研發等相關工作。 〝本公司為工研院合格派遣廠商〝 薪資依學經歷核薪 享年終獎金/ 績效獎金/年度調薪 若對職缺有興趣或想了解,可加賴詢問哦(搜尋手機號碼即可)
    展開
    就業保險員工體檢勞退提繳金職災保險勞保
  • 時薪196元 新北市五股區 工作經歷不拘 6天前更新
    應徵專線📞0907101975 或加入LINE ID搜尋👉@834smrge找張小姐 (請留言傳全名+電話+職缺截圖給我喔!) ▬▬▬▬▬▬【職缺優勢】▬▬▬▬▬▬ ❤️週休六日陪家人 ❤️另有外勤職務津貼 ❤️穿便服上班,免無塵衣 ❤️站點獨立作業,沒壓力 ❤️可隔日領週領,不怕沒錢 ❤️錄取率高,沒經驗也可以 ❤️長期穩定工作/不怕無薪假 ❤️享有勞健保/團保及勞退6% ❤️任滿三個月有三節禮品或禮金 ▬▬▬▬▬▬【職缺介紹】▬▬▬▬▬▬ 工作地點:新北市五股區五權五路 (🚌近五股工業區、新北產業園區) 🛵離泰山、新莊、三重、蘆洲都方便~ 工作內容:電表及儀表的產品⌚ 外勤通訊組:維修台電表、測試、現場主管交辦事項。 ☝️需要接受外勤作業☝️會跑其他北部地區 (有交通車接送到五股五權五路廠區來回) <🆗無經驗可,公司的人都會教🆗> 工作薪資:💰時薪$196起 平均22天上班,可月賺41096起~(已含外勤津貼) 《若有加班費,會依照勞基法另外計算!》 工作時間:週一到週五08:00-17:00 用餐方式:自理(上班日薪資會補貼$70) 休假方式:週休六日/見紅休
    展開
    績效獎金意外險年終獎金三節獎金禮品
  • 月薪29500~40000元 台南市安南區 工作經歷不拘 6天前更新
    ⚡ 從TFT LCD、太陽能、LED到半導體產業,不斷地求新求變,研發與生產各種產品。 ⚡速速卡位, 立即安排 ⚡ 薪資可週領、可領現金 ◆工作地點:台南市安南區 ☺工作內容☺ 1. 自動化設備配電盤/配線。 2. 機台外部走線配置。 3. I/O和機台測試調整、問題整合。 4. 無塵室裝機作業。 ☺上班時間&薪資☺ ‼常日班‼ 週一-週五8:30~17:30 - 薪資$29,000-$40,000(依照學經歷敘薪) ❤️職缺好康報報 ⫸勞健保、團保、退休金提撥6% ⫸三節禮金或禮卷或禮品 ⫸轉正機會高 ⟡⟡公司福利⟡ 勞、健保、團險、勞退6% 星旺-三節【禮金、禮品、禮卷】 福委會-結婚禮金、生育補助、子女獎助學金、…等 ▬▬【❤心動報名❤】▬▬ 1<線上投履歷> 2<♡搜尋LINE ID:@hopehr108找Hanna♡> ▬▬▬▬▬▬▬▬▬▬▬▬▬
    展開
    子女教育補助生育補助員工結婚補助員工手機配發或補助產假
  • 面議(經常性薪資達4萬元或以上) 新竹市東區 工作經歷不拘 5天前更新
    【工作內容】 核心在於確保每一顆出廠的晶片都達到完美品質。您可以根據志趣選擇站別:【測試】&【組裝】 1. 測試執行:照標準步驟(SOP)操作高科技測試機台,檢測產品性能並記錄數據。 2. 組裝作業:精確執行產品組裝流程,維持高效能的產線運作。 3. 設備維護:遇到機台小狀況時,進行初步排除,並與工程團隊協作解決問題。 【徵才條件】 1. 具備經驗:有半導體、封測廠或相關製造業產線操作經驗者尤佳。 2. 細心負責:專注於細節,對產品品質有要求。 3. 穩定性高:喜歡規律工作步調,依照SOP處理任務,具備良好的溝通與協作精神。 【進行流程】 1. 文件書審 2. 安排直屬主管 meeting
    展開
    年節獎金員工生日禮金產檢假產假安胎假
  • 無經驗也能轉職成功,高雄台南+月薪三萬工作機會