面議(經常性薪資達4萬元或以上) 桃園市大園區 工作經歷不拘 2天前更新
Role Summary/Purpose:
Perform Non Destructive special processes on the CF6 and GEnx family of engines.
Essential Responsibilities:
Production Means – NDT
- Perform the NDT inspection of engine component parts to identify discontinuities for further evaluation in accordance with the repair and overhaul manual specifications.
- Have the skills and knowledge to set up and standardize equipment, process parts, interpret and evaluate for acceptance or rejection, and document results in accordance with approved work instructions.
- Be thoroughly familiar with the scope and limitations of the technique/method.
- Have the skills and knowledge to conduct system performance checks in accordance with the applicable process standard.
- Be capable of providing the necessary guidance and/or supervision to trainees and Level 1 NDT inspector.
- Be familiar with the codes, standards, and other contractual documents that control the method as used by the employer.
- Be capable of developing work instructions from approved general procedures. Such work instructions shall require final approval by a Level 3 certified in the method.
- Have a basic knowledge of relevant product manufacturing and inspection technology.
- Have a basic knowledge of aircraft or vehicle maintenance.
- Under the instruction of Level 3 NDT Inspector, to be qualified to conduct training for Level 1 NDT Inspector and trainees, and monitor NDT operations of Level 1 NDT Inspector.
- Ensure thorough familiarity with the scope and limitations of the techniques/methods being applied within one‘s current qualification applicable to one or all of the following NDT disciplines: FPI, MPI, Eddy Current, and/or Ultrasonic.
Qualifications/Requirements:
- NAS 410 or EN4179 Level II certification in FPI required.
- NAS 410 or EN4179 Level II certification in MPI, Eddy Current and Ultrasonic would be preferred.
- Airframe and Power Plant certificates issued by CAA is preferred.
- Adapted mechanical, technical, and interpersonal skills.
- May perform 〝On Call〝 duty on a rotational basis.
- Willingness to work night shifts, either permanently or rotationally.
- Regularly use hands and arms.
- Occasionally sit, stand, and walk.
- Regularly lift/move up to 20 pounds and occasionally up to 40 pounds.
- Have close vision, color vision, and the ability to adjust focus.
- Work with unique chemicals and wear recommended PPE.
Ps.
1. 此為外商合約制工作(Contractor) ,後依照專案需求及個人績效評估安排 調薪/續聘,或是轉為正式員工
2. 工作地點 : 桃園大園/觀音
3. 具有非破壞檢驗NDT Lv2 以上證照,檢驗過飛機引擎經驗或是維修過飛機引擎
4. 外國人一同共事,直接report 給國外主管,工作場域為中文溝通為主,但希望能懂英文專業術語 (偏好英文CV,但中文可接受)
5. 須能夠接受周一至周六輪班,並有輪值津貼,非固定周休2日
6. 薪資可談
7. 有機會到國外參加受訓課程 美國/新加坡/馬來西亞
8. 台北桃園有交通/免費供餐
展開 意外險週休二日勞保健保